top of page
Home Assistant Connect ZBT-2 Zigbee Thread USB адаптер — Домотика Македонија
Home Assistant Connect ZBT-2 е компактен USB адаптер кој додава Zigbee 3.0 и Thread поддршка на вашиот Home Assistant систем. Со прецизно подесена антена и MG24 чип, нуди долг дострел, стабилна врска и инстантно спарување на уреди.
 
Главни карактеристики:
  • Zigbee 3.0 и Thread поддршка преку Home Assistant
  • 4 пати побрз од претходната генерација ZBT-1
  • Лесна миграција од ZHA, deCONZ и Zigbee2MQTT
  • Plug-and-play поставување — без компликации
  • USB-C поврзување, Silicon Labs MG24 + ESP32-S3
  • OTA ажурирања за Zigbee и Thread уреди
  • Поддржува Matter-over-Thread уреди
  • Компатибилен со сите 2.4 GHz региони
 
Зошто да го купите Home Assistant Connect ZBT-2 во Македонија кај Домотика? Домотика е официјален дистрибутер на Home Assistant хардвер во Република Северна Македонија. Добивате оригинален производ за европскиот пазар, со официјална гаранција и целосна локална поддршка.
 
-
 
Home Assistant Connect ZBT-2 — USB Zigbee/Thread, 4× Faster Performance. Upgrade your Home Assistant hub with a robust, low-latency mesh for sensors, lights, and locks. ZBT-2 forms a Zigbee or Thread network using built-in HA integrations, delivering long range and stable, local control. A tuned antenna and next-gen MG24 chip deliver top performance and effortless, plug-and-play setup.
 
Main Characteristics:
  • Zigbee 3.0 & Thread support (via HA)
  • 4× faster vs ZBT-1; optimized 4.16 dBi antenna
  • Easy migration from ZHA/deCONZ/Zigbee2MQTT
  • Status LED; vertical mount guidance reduces interference
  • USB-C; Silicon Labs MG24 + ESP32-S3
 
Why buy Home Assistant Connect ZBT-2 in Macedonia from Domotika? Domotika is the official distributor of Home Assistant hardware in the Republic of North Macedonia. You receive an original product intended for the European market, with an official warranty and full local support.

Home Assistant Connect ZBT-2 Zigbee and Thread USB adapter

3.890,00 ден.Price
Tax Included
Quantity

  • Kickstart your smart home easily with Home Assistant Connect ZBT-2!

    The smart adapter Home Assistant Connect ZBT-2, featuring a USB gateway with a precisely tuned antenna and the MG24 chip, delivers long range, peak performance, and instant pairing for Zigbee 3.0 and Thread devices. Stability and speed are guaranteed even in demanding networks.

    The second-generation Connect platform is open and maker-friendly—easy to disassemble, allows modifications, and supports seamless migration.

    Thanks to the Home Assistant guide, setup is plug-and-play, and you gain broad compatibility with ZHA, Zigbee2MQTT, and OpenThread Border Router.

    Key Features:

    • Plug-and-play Zigbee & Thread for Home Assistant—no hubs, no hassle.
    • Tuned antenna + MG24 radio = long range and rock-solid stability.
    • Migrate your old network in minutes using the built-in guide.
    • 4× faster response than our first-generation adapter.
    • Works great with ZHA, Zigbee2MQTT, and OpenThread Border Router.
    • Add Matter-over-Thread devices without needing to change settings.
    • USB-C powered, compact design, and near-silent operation.
    • Open, maker-friendly hardware with accessible pads and pins.
    • OTA updates keep your Zigbee and Thread devices current.
    • Supports all 2.4 GHz regions—ready for worldwide deployment.
    • Reduce the number of hubs and manage everything directly in Home Assistant.
    • Built by the team advancing Home Assistant—reliability you can trust.

    Why Choose It

    • Optimized antenna for reliable Zigbee/Thread coverage.
    • Faster response times - up to 4× compared to the first generation.
    • Uncompromised performance with MG24 and ESP32-S3 bridge.
    • Easy setup and migration thanks to the HA guide.
    • Network choice - launch Zigbee or Thread in minutes, connect Matter-over-Thread.
    • Open design - unlocked, open-source friendly, accessible pins.
    • Broad compatibility - ZHA, Zigbee2MQTT, and OTBR.

    Typical Usage

    • Consolidating multiple hubs into a single coordinator in Home Assistant.
    • Adding proven Zigbee sensors and lights alongside new Matter-over-Thread devices.
    • Upgrading from an older dongle with smooth network migration.

  • Home Assistant Connect ZBT-2 Technical Specification:

    • Model: NC-ZBT-9741
    • Certifications: CE, FCC, RCM
    • FCC-ID: 2A8ZE04
    • Origin: Made in China

    Radio and Protocols

    • Support: Zigbee 3.0, Thread (OpenThread Border Router)
    • Regions: All Zigbee/Thread regions and 2.4 GHz channels
    • Matter: Works with Matter-over-Thread devices in Home Assistant

    Chipset

    • Silicon Labs MG24 (Zigbee/Thread radio)
    • ESP32-S3 (USB-serial bridge)

    Antenna Parameters

    • Band: 2400–2483.5 MHz
    • Peak Gain: 4.16 dBi
    • Output Power: 10 dBm (EU), 8 dBm (rest of the world)
    • Radiation: Omnidirectional
    • Dimensions: Ø 24 mm × 164 mm
    • Note: Range is affected by placement and building materials.

    Power and Connection

    • Connector: USB-C
    • Input: 5 V DC, 500 mA

    Device Properties

    • Dimensions & Weight: 83 × 83 × 179 mm, 157 g
    • Packaging: 227 × 168 × 42 mm, 350 g
    • Material: Polycarbonate; colors: white and semi-transparent

    Environment

    • Use: Indoors only
    • Temperature: 0 °C to 65 °C (Antenna −40 °C to +85 °C)
    • Humidity: Non-condensing
    • Recommendation: Keep dry, free of excessive dust; do not expose to direct sunlight or heat sources.

    Package Contents

    • External antenna with stand
    • USB cable 1.5 m (USB 2.0/3.0)
    • Quick start guide

Слични производи

bottom of page