Home Assistant Connect ZBT-1 е наједноставниот начин да додадете Zigbee поддршка на вашиот Home Assistant систем. Компактен, лесен за поставување и целосно компатибилен со Home Assistant и Zigbee2MQTT.

Zigbee 3.0 и Thread поддршка
Plug & Play — автоматски препознаен од Home Assistant
Компатибилен со Raspberry Pi и други Linux уреди
OTA и OTW ажурирања на фирмверот
+20 dBm дострел за стабилна врска
Вклучен USB продолжен кабел за избегнување на интерференција

Зошто да го купите Home Assistant Connect ZBT-1 во Македонија кај Домотика? Домотика е официјален дистрибутер на Home Assistant хардвер во Република Северна Македонија. Добивате оригинален производ за европскиот пазар, со официјална гаранција и целосна локална поддршка.

Home Assistant Connect ZBT-1 is a universal Zigbee compatible USB adapter.

A future firmware update will bring Thread support, this allows Connect ZBT-1 to be used to connect to Thread-based Matter devices.
Easy way to add Zigbee support
Perfect match for Home Assistant users
Updates delivered via Home Assistant
Plug and Play

Home Assistant Connect ZBT-1 (Zigbee and Thread USB adapter)

Name: Home Assistant Connect ZBT-1 (Zigbee and Thread USB adapter)
Brand: Home Assistant

2.990,00 ден.

Tax Included

Quantity

The Home Assistant Connect ZBT-1 is the easiest way to add Zigbee support to your Home Assistant instance.

A future firmware update will bring Thread support; this allows Connect ZBT-1 to be used to connect to Thread-based Matter devices.

Home Assistant Connect ZBT-1 is hardware-wise exactly the same device as Home Assistant SkyConnect. It's basically the same device with a different name. The only thing that will change is the logo on the product and packaging and the EAN code. Hardware and feature-wise it's 100% the same.

The Home Assistant Connect ZBT-1 is compatible with the Raspberry Pi and other Home Assistant-supported Linux devices. The Home Assistant Connect ZBT-1 will allow you to easily set up and use Zigbee sensors and devices with your Home Assistant install, allowing even more automation and integration options for your home.

The adapter uses the same Silicon Labs chip used in the Home Assistant Yellow device (Silabs EFR32MG21). A USB extension cable is included in the package to avoid interference caused by USB 3.0 ports.

Features

Zigbee and Thread adapter - based on USB 2.0

Compatible - Zigbee Works with Home Assistant and Zigbee2MQTT

Future Proof - Updatable Updates delivered via Home Assistant

Over-The-Wire (OTW) - update support via USB

Reliable Range - +20 dBm

Zero Setup - Plug and Play Automatically detected by Home Assistant

Documentation - https://skyconnect.home-assistant.io/documentation/

Why include a USB extension cable?

USB 3.0 ports (the ones with blue on the inside) are known to cause significant noise and radio interference to any 2.4Ghz wireless devices. This includes Zigbee and Thread. If you do not use the extension cable, it may not work at all, and if it does, it could be flaky at best with intermittent problems (issues with pairing, device dropouts, unreachable devices, timeout errors, etc).
Components

Supply: 5V DC / up to 150mA

Radio Chipset: Silabs EFR32MG21

Frequency: 2.4GHz

TX Power: up to +20dBm

RX sensitivity: -104dBm (250kbps)

Antenna: PCB

Protocols: Zigbee 3.0, Thread (Matter)

USB: 2.0 full-speed (12Mbps), Silicon Labs CP2102N USB-to-UART bridge

Stack : EmberZNet serial protocol (EZSP)

Form Factor

Width: 18 mm/0.7 inch

Height: 4.5 mm/1.4 inch

Depth: 38.5 mm/1.5 inch

Weight: 4 g/0.14 oz

Package Contents

1x Home Assistant Connect ZBT-1 USB Adapter

1x USB extension cable

Home Assistant Connect ZBT-1 (Zigbee and Thread USB adapter)

Product Specifications

Technical Specifications

Слични производи